CompositesWorld
Issue link: https://cw.epubxp.com/i/532917
41 CompositesWorld.com › By the year 2020, piston cylinder housings molded from polymer composites will be introduced into passenger car and motorcycle engines, replacing the aluminum components currently in use. That's the prediction from SBHPP High Performance Plastics, a business unit of Sumitomo Bakelite Co. Ltd. (Ghent, Belgium, and Tokyo, Japan). Specifcally, SBHPP has researched injection molded cylinder housings made with its glass fber-reinforced phenolic bulk molding compound (BMC), and claims it can deliver the same performance as die-cast aluminum parts along with signifcant reductions in weight, engine noise and heat radiation. SBHPP recently cooperated with the Fraunhofer Project Group – New Drive Systems (Karlsruhe, Germany) to mold a proof-of-concept composite cylinder casing for a single-cylinder 650-cc engine. A 55% glass fber-reinforced phenolic resin was comolded with integrated inserts and a cylinder liner of aluminum (a heat-conductive liner will be needed with a BMC casing in a liquid-cooled engine, to disperse combustion heat). The part was produced in an optimized injection molding process developed with Fraunhofer, in a part cycle time of 90 seconds. Thermosensors mounted on the exhaust, drive and inlet sides of the composite part all showed a signifcantly lower temperature during engine operation than sensors on the reference aluminum housing. Plus, the composite casing was 20% lighter, and acoustic tests confrmed it also greatly reduced engine noise. The project also showed approximately 10% lower manufacturing costs for a production run of up to 30,000 parts per year; for higher production volumes, the estimated cost reduction can be even more signifcant, claims SBHPP. Hendrik De Keyser, marketing and technology ofcer at SBHPP, notes that weight reduction has become a primary focus for auto manufacturers under increasing pressure to improve fuel economy and reduce emissions. He cites lifecycle assessments that show the environmental impact of phenolic composite components over their entire lifetime is lower than that of aluminum alternatives. SBHPP is marketing the concept to engine suppliers and automotive OEMs and aims, ultimately, to introduce an all-composite engine. "In 3-5 years' time composite cylinder housings will be a reality," adds De Keyser. Phenolic BMC could replace aluminum in cars/motorcycles Composite engine piston cylinder housings Source | SBHPP APPLICATIONS Weber Manufacturing Technologies Inc Tel 705.526.7896 • Midland, ON www.webermfg.ca Precision Tooling and CNC Machining for the Composites Industry Invar Steel NVD Nickel Precision a l u m w e i g S B P r o j G e r c y l A 5 c o m l i n e n e e d t o d i i n a n w i t h S o u r c e | S B H P P