CompositesWorld

JUN 2016

CompositesWorld

Issue link: https://cw.epubxp.com/i/681810

Contents of this Issue

Navigation

Page 39 of 51

JUNE 2016 38 CompositesWorld APPLICATIONS HMPP fiber hybrids graduate from tennis to … tornados! TAKING THE HIT WITHOUT ADDING WEIGHT › Although high stiffness and strength at very low weight have made carbon fiber (CF) a mainstay in high-performance sporting goods, athletes now also desire vibration damping, which improves athlete control and reduces fatigue. This trend toward a better "feel" — a quality CF cannot provide on its own — created a niche for Innegra, the tradename for high-modulus polypropylene (HMPP) fiber produced by Innegra Technologies (Greenville, SC, US). An early adopter was HEAD Sport (Kennelbach, Austria). Tennis players valued the energy absorption HMPP added to HEAD's carbon fiber racquets: HEAD has measured a 17% reduction in vibration in its hybrid HMPP/CF racquets, which are now a standard product line, reports Innegra Technologies' business development director Jen Hanna. Surfers appreciated HMPP's ability to keep their fiberglass boards from breaking. Similarly, HMPP in Adventure Technology's (Greenville, SC, US) whitewater kayak paddle shafts significantly reduced catastrophic failure and increased abrasion resistance by 200% in the paddle's glass fiber blade. "What we're seeing," Hanna emphasizes, "is a real push for increased toughness, durability and vibration damping, but without sacrificing light weight." Innegra also iced a spot in the National Hockey League (NHL). A hybrid HMPP/CF fabric and a special resin developed for Bauer (Exeter, NH, US and Mississauga, ON, Canada) was used in Bauer goalie sticks for years. NHL players suggested applying the hybrid fabric in goalie masks, which must withstand multiple hits per game from 100-mph pucks. HMPP reportedly dissipates energy very quickly, with a sonic velocity — the rate (m/sec) at which energy is dispersed in ballistics testing — near that of more expensive aramid fber. "The players say they don't get the ringing in their ears that they do with the normal masks," says Hanna. "You could build up more toughness and durability with more CF layers," concedes Hanna, "or with plastics like nylon, but this also means adding weight." She says HMPP ofers a higher elongation-to-break than CF while ofering a higher modulus than either standard PP, polyethylene (PE), or polyamide (nylon). And although HMPP is hydrophobic, like ultrahigh-molecular-weight PE (UHMWPE) fber, it has enough surface roughness to enable good bonding, which the UHMWPE's slick surface makes difcult. "Innegra really excels in applications that have to take a lot of abuse," says Hanna. That was not lost on Tornado Pod (Dallas, TX, US) founder Wes Kouba. Seeing what Innegra hybrids had achieved in the sporting goods world, he sought to use the fiber in his cost-effective, compact alternative to traditional storm shelters. His TornadoPod uses a submerged 1.5m-diameter PE unibody, anchored to the ground with poured concrete, to accommodate up to six adults, and a slidable hybrid glass/HMPP fiber composite dome that extends almost 1m above ground to permit easy entry and exit. The dome has been tested to Federal Emergency Management Agency (FEMA, Washington, DC, US) standards, for which certification testing includes four 100-mph impacts from wooden two-by-fours fired from a cannon at close range. "The two-by-fours just bounced off the dome," recalls Innegra Technology chief composites engineer Russ Emanis. View a video of the TornadoPod testing online | short.compositesworld.com/tornadopod Source | BAUER Hockey Vibration Damping of lnnegra S 0.006 0.005 0.004 0.003 0.002 0.001 0 0 200 400 600 800 Resonant Frequency (Hz) Damping ratio 100% InnegraS 60/40 Carbon/Innegra 100% carbon Innegra fber ofers low mass, toughness, durability and vibration damping (see chart, above) in glass and carbon fber composites, expanding from Bauer hockey sticks to goalie masks. Source | Innegra Technologies

Articles in this issue

Links on this page

Archives of this issue

view archives of CompositesWorld - JUN 2016