CompositesWorld
Issue link: https://cw.epubxp.com/i/620463
Registration Link: http://short.compositesworld.com/assemblies EVENT DESCRIPTION: When problems occur on the manufacturing foor or a quality issue arises in the feld, it can quite likely be traced back to the interface between components. Problems such as the structural failure of a joint or an assembly issue originating between mixed material components can be extremely costly to your organization. Tese issues most certainly will expand as a wider selection of alternative materials and joining techniques are utilized within fastened assemblies. Designing your products with an emphasis on the joints will enable much greater visibility into po- tential problems and ensure the best practices for joint design are incorporated into your process. In this webinar, Steve Peck will discuss how to efectively design joints and fasteners to overcome these issues with Siemens PLM Syncroft software. PARTICIPANTS WILL LEARN: • How the combination of geometry, material form, material combinations, part consolidation, joining techniques and manufacturing process drives the optimization of well-designed composite parts and multi-material assemblies • Why it is key to design products with an emphasis on joints • Under standing best practices of joining fastened assemblies • How technology can support the optimization of joints and fasteners for composites and multi-material parts • Introduction to Siemens PLM Syncroft software Addressing the Challenge of Joining Complex Assemblies REGISTER TODAY FOR WEBINAR AT: DATE AND TIME: January 20, 2016 • 2:00 PM EST PRESENTER PRESENTED BY siemens.com STEVE PECK Senior Product Manager, Syncroft Portfolio