CompositesWorld
Issue link: https://cw.epubxp.com/i/866813
SEPTEMBER 2017 6 CompositesWorld PERSPECTIVES & PROVOCATIONS ยป As I write this column, we in the Northern Hemisphere are experiencing the "dog days of summer," that period from early July until late August when outdoor temperatures and humidity are the highest, and, it seems, business activity is at its lowest. It is during this time that many people take their personal holidays and manufacturing facilities perform annual shutdown maintenance. While composites industry activity goes on, there are typically few blockbuster announcements. at period of (relatively) low activity offers management a good time to look at the forthcoming months, and to reflect on the year to date. It seemed like a good time to do the same. Because this will be part of the September issue of Compos- itesWorld, it comes out in one of the busiest times of the year for composites- related activi- ties. And these run right up until the beginning of December. ere are a host of confer- ences, especially in the US and Europe, starting with the SPE Automotive Composites Conference, CAMX and IBEX in three consecutive weeks in September in the U.S. October brings a JEC conference to Knoxville, TN, US, and the American Society for Composites meeting to Purdue University in Indiana. e Defense Manufacturing Conference and the CompositesWorld Carbon Fiber Conference highlight November. In Europe, Compos- ites Europe highlights September, GO Carbon Fiber October and SAMPE Europe November. All these events are great for bench- marking what is going on within the world of composites, devel- oping new contacts and business prospects. ese last months of the year are also are a big time for formu- lating 2018 plans and budgets for many companies, as well as research institutes, including my organization, the Institute for Advanced Composites Manufacturing Innovation (IACMI, Knox- ville, TN, US). What will be the R&D; emphasis for next year? What new products will be launched? What trade shows and confer- ences will be supported? What projects are in our pipeline and how will we resource those? What are our hiring and training needs? What capital investments will be made? What funds do we need to borrow or raise to support growth? All these decisions are taken with an eye on the longer term, aligned with an entity's stra- tegic plan. With that as the future, what has 2017 brought so far? Overall enthusiasm within the industry has remained at a high level this year, and JEC Paris was clearly the most well attended and exhib- itor-intensive composites trade show in history. Back in December 2016, I predicted the wind industry would have a record year, and there is still a chance of that, although the Global Wind Energy Council (Brussels, Belgium) is projecting 60 GW of new capacity, just under the record set in 2014. What is clear is that blades keep getting longer, making wind increasingly more competi- tive against fossil fuels. I also predicted that Boeing or Airbus would announce the devel- opment of a composite-winged, single-aisle aircraft in 2017, and the Paris Air Show would be the most likely place to do so. Boeing did announce a longer version of the 737MAX, and Airbus a larger version of the A380, but neither proposed a composite-winged replace- ment for the 737 or A320. Bombardier did reveal that its composite- winged CSeries is achieving fuel economy roughly 10% above what was promised at the program start, so perhaps the pressure to follow is ramping up. I forecasted that a major OEM other than BMW would announce a significant volume production program with a reasonable deploy- ment of composites in a multi-material platform. No word on that yet, but with a significant portion of the year remaining, I am still hopeful that will happen. One prediction has come true: Dieffenbacher (Eppingen, Germany) and Broetje (Grenzach-Wyhlen, Germany) have started shipping systems that manufacture high-volume, low- waste continuous-fiber preforms. Fill (Gurten, Austria) and several other machinery companies have announced they will have similar systems ready for evaluation before the end of this year. My other two predictions involved positive movement on the recycling and infrastructure fronts. Excitement around recycling of advanced composites continues to grow, with fibers increasingly finding their way into consumer and industrial products. On the infra- structure front, the new administration in the US has talked about this as a priority, and it is likely to receive bipartisan support, but legisla- tion to fund these initiatives has not made it to the front of the queue. It will be interesting to see if it can get there by December. A large US investment to repair and rebuild roads and bridges will, I hope, open opportunities for increased composites use. It should be an exciting five months to the end of 2017, and I believe this will portend well for 2018 and beyond, especially for the compos- ites industry. The lull of summer Dale Brosius is the chief commercialization officer for the Institute for Advanced Composites Manufacturing Innovation (IACMI, Knoxville, TN, US), a US Department of Energy (DoE)- sponsored public/private partnership targeting high-volume applications of composites in energy-related industries. He is also head of his own consulting company and his career has included positions at US-based firms Dow Chemical Co. (Midland, MI), Fiberite (Tempe, AZ) and successor Cytec Industries Inc. (Woodland Park, NJ), and Bankstown Airport, NSW, Australia-based Quickstep Holdings. He also served as chair of the Society of Plastics Engineers Composites and Thermoset Divisions. Brosius has a BS in chemical engineering from Texas A&M; University and an MBA. During the North's summer holiday season, many take time to take stock of what the future might bring.