CompositesWorld

OCT 2017

CompositesWorld

Issue link: https://cw.epubxp.com/i/882089

Contents of this Issue

Navigation

Page 5 of 51

OCTOBER 2017 4 CompositesWorld FROM THE EDITOR » I attended the 2017 SPE Automotive Composites Conference and Exhibition (ACCE) in September, in Novi, MI, US. is event is, arguably, the composites industry's authoritative go-to confer- ence for the latest on materials, processes and emerging technolo- gies for automotive manu- facturing. It draws OEMs and suppliers alike. As you might expect, the presentations focused on materials, processes and tech- niques that have helped simplify and streamline the integration of composite materials into high- volume automotive manufacturing: Snap-cure thermoset resins, thermoplastic composites, high-pressure resin transfer molding (HP-RTM), compression molding, design optimization, sheet molding compound (SMC), recycling, automation for high-speed/ high-volume manufacturing, long fiber processes and more. Perhaps the most revelatory presentation at the 2017 edition of ACCE came from Patrick Blanchard, global technical leader – composites, at Ford Motor Co., who gave a keynote speech on the third day of the conference. He discussed, among other things, the biggest hurdles to integrating composites into high-volume manufacturing. As an example, he pointed to a carbon fiber B-pillar insert demonstrator developed by Ford, Dow and Conti- nental Structural Plastics to evaluate design, manufacturing and assembly challenges. is work highlighted for Blanchard three major hurdles composite materials face. His comments on each: 1) Design optimization. e composites design process — compared to steel, aluminum and unreinforced plastics — is highly protracted due to the number of degrees of freedom offered by composites (resin/fiber combinations) and the absence of robust and reliable automated optimization tools. Simplified tools are needed to reduce the lead time for design iteration. 2) Forming simulation. Kinematic drape models are only suited to a first-order approximation and do not capture critical forming constraints. Finite element models incorporating contact demonstrate better correlation, but extensive validation is required. 3) Assembly. How does an OEM insert a part or structure into the assembly process? Adoption of composites in body-in-white (BIW) solutions will require joining and assembly methods that can tolerate mixed-material joints. e transition from welding processes to a combination of bonding and/or mechanical fasteners may be required. I asked Blanchard which of the three is most onerous or of concern to him. Most problematic, he said, is #1 — design opti- mization. At Ford, he explained, vehicle design and development includes specific and limited time windows for the design and opti- mization of each part, leading to implementation. e performance data associated with steel, aluminum and plastics allow quick devel- opment of parts made with these materials. Composites, conversely, lack those robust performance data, and, thus, are more difficult to move through the design cycle. In short, automotive OEMs can't afford the time it takes to design a composite part well. is is not a new problem, and probably solvable if the slate of resins, fibers and manufacturing processes used in automotive manufacturing were well established and understood. But they are not, mainly because material suppliers are still busy optimizing resins and fibers, and machinery suppliers are busy evolving manufacturing technologies. Which is great, because optimization is needed. But the result is, as usual, an innovation-driven, highly dynamic, rapidly evolving manufacturing landscape that is difficult to codify, model and simulate. Still, the CAE software suppliers serving the composites industry are keenly aware of the challenge their customers face, and I expect we will see, in the next several years, substantial improvement in the speed and accuracy of design and simulation tools. Certainly, all of us are highly motivated to do what we can to make composites easy to use, apply and manufacture. The biggest hurdle for automotive composites. JEFF SLOAN — Editor- In- Chief

Articles in this issue

Archives of this issue

view archives of CompositesWorld - OCT 2017